Enhancing basic computer network learning outcomes of vocational high school students by implementing a video-based learning model
Abstract
Many students still achieved scores below the minimal completeness criteria when learning basic computer networks. This was because the teacher still uses traditional media, such as printed worksheets in the teaching process which made the learning boring and harder for students to comprehend what the teacher was teaching. Therefore, this research aimed to implement video-based learning within the educational process. This study employed a pre-experiment methodology by using a single pre- and post-test group. Thirty-three students majoring in computer and network engineering served as the research subjects. The paired sample t-test and N-gain score were the data analysis methods employed to examine the efficacy of the video-based instruction. The results demonstrated a significant improvement from students' knowledge before to that of after being engaged in video-based learning. Thus, it is possible to conclude that a video-based instruction can greatly enhance students' understanding on fundamental computer network science. According to the study's findings, the video-based learning ought to be incorporated into the curriculum of vocational education, particularly in the Department of Computer Network Engineering, to ensure that the students fully comprehend the subject matter and that the learning process runs smoothly.
References
Alghamdi, Fahad. A., Younes Hamed, A., Alghamdi, A. M., Salah, A. Ben, Farag, T. H., & Hassan, W. (2023). A genetic algorithm for shortest path with real constraints in computer networks. International Journal of Electrical and Computer Engineering (IJECE), 13(1), 435. https://doi.org/10.11591/ijece.v13i1.pp435-442
Almaazmi, J., Alshurideh, M., Al Kurdi, B., & Salloum, S. A. (2021). The Effect of Digital Transformation on Product Innovation: A Critical Review (pp. 731–741). https://doi.org/10.1007/978-3-030-58669-0_65
Aswardi, A., Putra Yanto, D. T., Dewi, C., Zaswita, H., Kabatiah, M., & Kurani, R. (2023). Human Machine Interface-Based Control Training Kit as Innovative Learning Media to Enhance Students’ Automation Control Skills in the Industry 4.0 Era. TEM Journal, 2157–2165. https://doi.org/10.18421/TEM124-26
Badruttamam, M., & Hadromi, H. (2021). Development Of Android-Based Interactive Jobsheet On Electrical Measuring Equipment Materials In Vocational School. Journal of Educational Research and Evaluation, 10(1), 37–47. https://doi.org/10.15294/jere.v10i1.50048
Cattaneo, A. A. P., Antonietti, C., & Rauseo, M. (2022). How digitalised are vocational teachers? Assessing digital competence in vocational education and looking at its underlying factors. Computers & Education, 176, 104358. https://doi.org/10.1016/j.compedu.2021.104358
Fajrin, M., Purwantono, P., Irzal, I., Rahim, B., & Zaus, A. A. (2023). The effectiveness of the case method to improve student learning outcomes in the SMAW subject. Jurnal Pendidikan Teknologi Kejuruan, 6(4), 270–277. https://doi.org/10.24036/jptk.v6i4.34723
Fokides, E., & Antonopoulos, P. (2024). Development and testing of a model for explaining learning and learning-related factors in immersive virtual reality. Computers & Education: X Reality, 4, 100048. https://doi.org/10.1016/j.cexr.2023.100048
Hafis, M., Syahril, S., Refdinal, R., & Prasetya, F. (2023). Optimizing learning engagement and performance in technical education: Harnessing the power of video tutorials for enhanced motivation and skill development in Shield Metal Arc Welding Subject. Journal of Engineering Researcher and Lecturer, 2(3), 120–128. https://doi.org/10.58712/jerel.v2i3.112
Isabelle M. L., S., Andrade, W. L., & Livia M. R., S. (2019). Analyzing the Effect of Computational Thinking on Mathematics through Educational Robotics. 2019 IEEE Frontiers in Education Conference (FIE), 1–7. https://doi.org/10.1109/FIE43999.2019.9028384
Jalinus, N., Ganefri, Zaus, M. A., Wulansari, R. E., Nabawi, R. A., & Hidayat, H. (2022). Hybrid and Collaborative Networks Approach: Online Learning Integrated Project and Kolb Learning Style in Mechanical Engineering Courses. International Journal of Online and Biomedical Engineering (IJOE), 18(15), 4–16. https://doi.org/10.3991/ijoe.v18i15.34333
Jalinus, N., Sukardi, S., Wulansari, R. E., Heong, Y. M., & Kiong, T. T. (2023). Teaching activities for supporting students’ 4cs skills development in vocational education. Journal of Engineering Researcher and Lecturer, 2(2), 28–37. https://doi.org/10.58712/jerel.v2i2.95
Lestari, S., Dayurni, P., Evasufi Widi Fajari, L., & Ya, K. Z. (2023). The impact of the removal of information and communication technology subjects on students’ digital literacy. Journal of Computer-Based Instructional Media, 1(1), 19–24. https://doi.org/10.58712/jcim.v1i1.17
Maor, R., Paz-Baruch, N., Grinshpan, N., Milman, A., Mevarech, Z., Levi, R., Shlomo, S., & Zion, M. (2023). Relationships between metacognition, creativity, and critical thinking in self-reported teaching performances in project-based learning settings. Thinking Skills and Creativity, 50, 101425. https://doi.org/10.1016/j.tsc.2023.101425
Medugu, P. M., Pwalakino, C. B., Mutah, Y., & Gandada, D. (2023). An Empirical Comparison of Power of Two Independent Population Tests under Different Underlined Distributions. Asian Journal of Probability and Statistics, 24(1), 10–21. https://doi.org/10.9734/ajpas/2023/v24i1514
Mispandi, M., Muh. Fahrurrozi, & Siti Mawaddah. (2023). The Effect Of Using The Flipped Classroom Learning Model Using Video Interactive Media On Learning Outcomes. IJE : Interdisciplinary Journal of Education, 1(1), 24–37. https://doi.org/10.61277/ije.v1i1.4
Moybeka, A. M. S., Bosco, F. H., Apalem, C. R., Chandra, D. A., & Efendi, E. (2023). Developing EFL Students’ Writing Ability Through Contextual Teaching and Learning (A Classroom Action Research Study). Journal of English Culture, Language, Literature and Education, 11(1), 79–97. https://doi.org/10.53682/eclue.v11i1.6107
Mukul, E., & Büyüközkan, G. (2023). Digital transformation in education: A systematic review of education 4.0. Technological Forecasting and Social Change, 194, 122664. https://doi.org/10.1016/j.techfore.2023.122664
Prashanth Kumar, K. N., Harish Kumar, B. T., & Bhuvanesh, A. (2024). Spectral clustering algorithm based web mining and quadratic support vector machine for learning style prediction in E-learning platform. Measurement: Sensors, 31, 100962. https://doi.org/10.1016/j.measen.2023.100962
Quy, V. K., Thanh, B. T., Chehri, A., Linh, D. M., & Tuan, D. A. (2023). AI and Digital Transformation in Higher Education: Vision and Approach of a Specific University in Vietnam. Sustainability, 15(14), 11093. https://doi.org/10.3390/su151411093
Richardo, R., Dwiningrum, S. I. A., Wijaya, A., Retnawati, H., Wahyudi, A., Sholihah, D. A., & Hidayah, K. N. (2023). The impact of STEM attitudes and computational thinking on 21st-century via structural equation modelling. International Journal of Evaluation and Research in Education (IJERE), 12(2), 571. https://doi.org/10.11591/ijere.v12i2.24232
Risfendra, R., Sukardi, S., & Setyawan, H. (2020). Uji Kelayakan Penerapan Trainer Programmable Logic Controller Berbasis Outseal PLC Shield Pada Mata Pelajaran Instalasi Motor Listrik. JTEV (Jurnal Teknik Elektro Dan Vokasional), 6(2), 48. https://doi.org/10.24036/jtev.v6i2.108508
Sansi, A. S., Rini, F., Mary, T., & Kiong, T. T. (2023). The Development of Android-based Computer and Basic Network Learning Media. Journal of Computer-Based Instructional Media, 1(2), 44–56. https://doi.org/10.58712/jcim.v1i2.19
Semathong, S. (2023). Participatory Action Research to Develop the Teachers on Classroom Action Research. Shanlax International Journal of Education, 11(3), 29–36. https://doi.org/10.34293/education.v11i3.6118
Shan, D. (2023). New Media Development Model Based on Computer Network Technology. Procedia Computer Science, 228, 655–662. https://doi.org/10.1016/j.procs.2023.11.076
Sukardi, Giatman, M., Haq, S., Sarwandi, & Pratama, Y. F. (2019). Effectivity of Online Learning Teaching Materials Model on Innovation Course of Vocational and Technology Education. Journal of Physics: Conference Series, 1387(1), 012131. https://doi.org/10.1088/1742-6596/1387/1/012131
Sukardi, Mayefis, R., & Usmeldi. (2020). Effectiveness of Mobile Learning Media on Computer Assembly at Vocational High School. Journal of Physics: Conference Series, 1594(1), 012012. https://doi.org/10.1088/1742-6596/1594/1/012012
Tavares Oliveira, M., Maciel Santos, M., Lucas Mayara da Cruz Reis, K., Resende Oliveira, L., & DeSantana, J. M. (2024). Transcutaneous Electric Nerve Stimulation in Animal Model Studies: From Neural Mechanisms to Biological Effects for Analgesia. Neuromodulation: Technology at the Neural Interface, 27(1), 13–21. https://doi.org/10.1016/j.neurom.2023.02.085
Wang, Y., Hong, D., & Huang, J. (2023). A Diffusion of Innovation Perspective for Digital Transformation on Education. Procedia Computer Science, 225, 2439–2448. https://doi.org/10.1016/j.procs.2023.10.235
Yanto, D. T. P., Kabatiah, M., Zaswita, H., Jalinus, N., & Refdinal, R. (2022). Virtual Laboratory as A New Educational Trend Post Covid-19: An Effectiveness Study. Mimbar Ilmu, 27(3), 501–510. https://doi.org/10.23887/mi.v27i3.53996
Yanto, R., Waskito, W., Effendi, H., & Purwanto, W. (2023). Development of Web-Based Learning Media Using Google Sites in Vocational High School Informatics Subjects. Journal of Vocational Education Studies, 6(1), 11–24. https://doi.org/10.12928/joves.v6i1.8027
Copyright (c) 2024 Herlin Setyawan, Sukardi Sukardi, Lili Safitri Diati, Yolanda Idha Fitri, Ambiyar Ambiyar, Debi Rianto
This work is licensed under a Creative Commons Attribution 4.0 International License.
